产品资料

PSPL10300B/PSPL10300B

如果您对该产品感兴趣的话,可以
产品名称: PSPL10300B/PSPL10300B
产品型号: PSPL10300B
产品展商: 美国泰克/Tektronix
产品文档: 无相关文档

简单介绍

The PSPL10300B信号脉冲发生器 a programmable pulse generator and a programmablePSPL10300B pattern generator.PSPL10300B信号脉冲发生器


PSPL10300B/PSPL10300B  的详细介绍

美国泰克/Tektronix PSPL10300B 信号脉冲发生器

Tektronix PSPL10300B Programmable pulse generator

产品介绍:

The PSPL10300B/PSPL10300B Pulse Generator provides high amplitude positive or negative pulses with convenient front panel or computer control. It has an adjustable baseline to provide up to ±5 V DC offset, or allows for external control of the baseline up to ±50 V. The output has fast edge rates, smooth transitions and minimal overshoot & ringing. Adjustable output levels are obtained using internal step attenuators, ensuring consistent signal shape at all settings. The outputs are designed for a 50 Ω impedance, but can safely drive any load from a short circuit to an open.

PSPL10300B/PSPL10300B Key performance specifications
  • Positive or negative polarity pulses
  • Adjustable positive pulse amplitude from < 5 mV to 50 V
  • Rise time 300 ps
  • Adjustable duration from < 1 ns to 100 ns
  • Single shot, or 1 Hz to 100 kHz repetition rate

Key features

  • Keypad interface
  • Programmable IEEE-488 
  • Internal, external, manual or GPIB trigger modes
  • Gated output
  • Port for external baseline offset up to ±50 V

Applications

  • University education and research
  • UWB signal source
  • Semiconductor characterization
  • Laser driver
  • PSPL10300B/PSPL10300B

Typical performance


PSPL10300B/PSPL10300B

15 V/div and 500 ps/div. Adjustable amplitude from -45 V to +50 V in 1 dB steps. Also adjustable baseline offset from -5 V to +5 V.



PSPL10300B/PSPL10300B

8 V/div and 1 ns/div. Adjustable duration from < 1 ns to 100 ns in 25 ps steps.



PSPL10300B/PSPL10300B

8 V/div and 200 ps/div. Leading edge 250 ps rise time.



PSPL10300B/PSPL10300B

20 V/div and 20 ns/div. 20 ns and 100 ns pulses.

PSPL10300B/PSPL10300B  Specifications

 

Specifications

The performance parameters listed here are typical values, parameters are guaranteed only when maximum and/or minimum limits are given.

Parameter Value
Polarity Positive or negative
Amplitude into 50 Ω (See Notes) 4.5 mV to 50 V positive, -4 mV to -45 V negative, adjustable in 1 dB steps
Amplitude accuracy, into 50 Ω (full output amplitude) ±2 V positive, ±3 V negative
Baseline Adjustable from -5 V to +5 V in 1.25 mV steps, external input provided for user-supplied offset of ±50 V
Transition time, leading edge (10 – 90%) 300 ps, 325 ps max.
Transition time, trailing edge (10 – 90%) 750 ps, 1 ns max.
Reflection coefficient 30% during pulse, +50% after pulse, improves with increasing attenuation
Source impedance (nominal) 50 Ω
Duration (FWHM) (See Notes) < 1 ns to 100 ns, adjustable in 25 ps steps
Baseline precursor < ±1%
Topline overshoot 2%
Topline perturbations ±1% for t < 3 ns (±2% for negative pulse)
Topline flatness ±0.5% for t > 3 ns (±2% for negative pulse)
Spurious pulse at 120 ns +6% with pulse duration ≤ 20 ns, +30% for pulse duration = 100 ns

Notes:

The duration and delay values displayed on the front panel LCD and programmed over GPIB are only to be considered “nominal” values and not absolute values. The duration and delay parameters exhibit some thermal drift, rep rate dependency and interaction. There will be some loss in amplitude at minimum pulse durations. The amplitude tolerance of ±2 V holds only for > 10 ns durations. The amplitude has a minor rep rate dependency. Always use an oscilloscope as an independent check of these pulse parameters. The instrument is adjusted and calibrated at the factory in an ambient temperature of 23 °C (±3 °C) at a rep. rate of 100 kHz. The instrument will operate over a temperature range of 0 to 50 °C but will not meet all specifications over this range.

PSPL10300B/PSPL10300B Trigger and timing
Parameter Value
Trigger in/out delay 185 ns
Repetition rate 1 Hz to 100 kHz
Period 10 µs to 1 s, 0.1 µs steps
Trigger mode Internal, external, manual, or GPIB
External trigger input level -2 to +2 V, 1 mV steps, positive or negative slope
Maximum external trigger input ±5 V
External trigger impedance 50 Ω
Trigger output into 50 Ω 1 V, 1 µs
Delay (See Notes above) 0 to 100 ns, 25 ps steps
Delay jitter, RMS < 10 ps
External gate input TTL, > 2 V on, < 0.5 V off
External gate impedance 50 Ω
General specifications
Parameter Description
Accessories included Power cord, BNC cable, rack mount kit, instruction manual
Front panel controls Power, menu, data entry, disable/enable, local, and manual trigger
Power supply (mains) 100, 115, or 230 VAC, ±10% switch selectable, 50 or 60 Hz
Power consumption 48 VA (60 Hz), 65 VA (50 Hz)
Operating environment (See Notes above) Indoors, 0 to 50 °C, < 80% rh
Safety certifications Conforms to EN-061010-1 (CE mark) UL-1244 and IEC-348. Safety class I. For lab use only by qualified personnel.
EMI certifications Conforms to EU Directive 89/336/EEC EN55011 and EN50082-1, CE mark
Dimensions 19.0 x 15.2 x 5.5 in. (48.3 x 38.6 x 14.0 cm)
Weight 21 lbs (9.5 kg)
Connectors SMA output, BNC trig in, gate in, trig out, BNC on rear panel for baseline offset d/a output and bias tee input, GPIB on rear panel
GPIB standard IEEE-488.1-1987 
GPIB interface functions SH1, AH1, T6, L4, SR1, RL1, PPO, DC1, DT1, CO and E2
Set up Save/recall in 10 memories with battery backup
Warranty One year

 

 

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

粤公网安备 44030402001445号