产品资料

TH2883-10 脉冲式线圈测试仪

如果您对该产品感兴趣的话,可以
产品名称: TH2883-10 脉冲式线圈测试仪
产品型号: TH2883-10
产品展商: 常州同惠/Tonghui
产品文档: 无相关文档

简单介绍

TH2883-10 脉冲式线圈测试仪,是同惠新研发的新一代脉冲式线圈测试仪,TH2883-10 脉冲式线圈测试仪 共有四个型号组成。该系列产品采用当前主流的32bit CPU和高密度SMD贴装工艺,65k色7寸宽屏TFT显示器。操作功能简洁易用,显示界面清新亮丽。


TH2883-10 脉冲式线圈测试仪  的详细介绍

常州同惠/Tonghui TH2883-10 脉冲式线圈测试仪

Impulse Winding Tester TH2883-10

 

产品介绍:

 

TH2883-10 脉冲式线圈测试仪
是同惠新研发的新一代脉冲式线圈测试仪,共有四个型号组成。该系列产品采用当前主流的32bit CPU和高密度SMD贴装工艺,65k色7寸宽屏TFT显示器。操作功能简洁易用,显示界面清新亮丽。高10kV脉冲电压、多8通道扫描测试、低至1uH电感量的线圈测试、200Msps的采样率,6k Bytes的存储深度、标准样本平均的使用、消磁脉冲的施加、高保真电晕的提取以及非破坏性测试的开启…… ,无不彰显在业界的优越地位。TH2883-10具有高10kV的脉冲输出电压,可测试更高绝缘耐压的匝间测试。TH2883系列产品标配USB Host、RS232C、USB Device和LAN接口,既方便您图形的快速保存,又方便您远程的随意掌控。

 

Details

TFT wide display: best visualization of signal

High-fidelity corona extraction technology: extract more reliable corona

TH2883 impulse winding tester adopts a new patent technology---high-fidelity corona extraction technology, developed by Tonghui. Coronas extracted through this method reflect the real coronas generated in the process of winding test without any lose. A traditional method for corona detection in other products is to calculate the waveform-sampling area by integral methods. Due to the different integral areas, the result of integration can be different as well. Therefore, it is impossible to judge the corona generated by the same coil product under the same test condition, which will result in different detection results. TH2883 series first achieves to extract corona without distortion on the impulse winding tester. With no doubt, the test result is reliable.

Fast storage of graphs: Never worry that you fail to store measurement waveform in time.

LXI Standard: remote control for your convenience

Multiple I/O interfaces of RS232C,USB Device and LAN: for your convenience and flexibility

Standard waveform automatic: your helpful assistant

Destructive testing: for suitable impulse testing voltage

Destructive testing does not really mean to destroy products under test but to choose a more suitable impulse testing voltage for the product. Some operators may not know how high an impulse voltage should be applied across the products. If the voltage is too low, the test results will not be as good as expected; if the voltage is too high, defective rate will increase. Destructive testing will help you to solve above problems. All you need do is to set the starting voltage, terminating voltage and step voltage. Then TH2883 series will automatically find out the critical voltage of corona discharge according to the change of corona of DUT and you can determine your impulse testing voltage based on the critical voltage. It is recommended that the impulse testing voltage be 70% of the critical voltage.

 

 

产品特点:

TH2883-10 脉冲式线圈测试仪
 首台符合LXI标准的线圈测试仪
 高10kV脉冲电压输出
 多8通道扫描测试
 低可测试低至1uH电感量线圈
 65k色7” TFT 宽屏显示
 200Msps的波形采样率
 大6次/秒的测试速度
 高保真电晕提取算法(砖利技术)
 四种波形比较判定方法
 电压、时间及频率的测量及仪器参数自动保存
 TH2883-10 脉冲式线圈测试仪 多样本平均,可进行32个标准波形的平均处理
 破坏性测试为您选择合适测试电压
 消磁脉冲的施加,保证测试波形一致
 20组仪器文件可供存储并自动加载
 屏幕信息快存于U盘 (COPY键)
 可通过U盘自动升级系统固件
 中英文可选操作界面及四种可选的显示界面效果
 Handler、RS232C、USB 和LAN接口
更多产品信息:www.1001718.org

 

Specifications

1.First LXI winding tester
2.Up to 200Msps sampling rate
3.Breakdown meausurement
4.High-fidelity corona extraction algorithm

 

Features:

  1. First LXI winding tester
  2. 65k color 7'' TFT wide display screen
  3. Up to 200Msps sampling rate
  4. Measuring speed: 10meas/sec
  5. 6kB memory depth
  6. High-fidelity corona extraction algorithm ( patent technology)
  7. Four waveform comparison methods
  8. Automatic storage of parameters
  9. Measurements on voltage, time and frequency
  10. Pan and zoom of waveforms
  11. Average times: 0 to 32
  12. destructive testing for your correct choose of voltage
  13. Use demagnetizing impulse to ensure the conformity of test results
  14. Automatic sampling of standard waveform
  15. 20 setup files can be stored and automatically loaded
  16. Waveforms can be stored in USB disk.
  17. Instrument firmware can be automatically upgraded through USB
  18. Chinese and English Operation languages
  19. Three user's operation display available
  20. Foot-control interface for fast measurement
  21. Handler interface can be used in automatic production line
  22. RS232C,USB Device and LAN to realize remote control

产品参数:

型号 TH2883-10 脉冲式线圈测试仪
脉冲电压 500V-10kV 20V步进±5%±25V
通道数 1
电感测试范围 ≥20uH
脉冲能量  0.5焦耳
测量速度 1.4次/秒(10kV 脉冲电压输出时)
施加脉冲数 大到32个
输入阻抗 5MΩ
显示器 800x480点65k色TFT,波形显示范围600x256
波形采集 采样率: 高200Msps, 8级可调分辨率: 8 Bits存储深度:6k Bytes样本平均:1-32
判定方法 和标准波形比较▪ 面积比较▪ 面积差比较▪ 电晕放电▪ 相位差比较
波形测量 波形的电压、波形的频率、波形的时间
触发方式 手动触发、外部触发、总线触发,内部触发
判别输出 OK/NG 显示,LED 灯指示,蜂鸣器报警
测量统计 具有测量结果的统计功能
存储器 仪器内部可以存储20组标准波形和仪器设置也可以使用U盘作为外部存储器
接口 Handler,RS232C,USB Device,USB Host,Lan
电源
供电电源 110V/220V±10% 50Hz/60Hz±5%
电源功耗 ≤200VA
通用条件
工作环境 温度 0℃ - 40℃
湿度 ≤75% R.H.
安全和电磁兼容 IEC61010-1:2001,IEC61326-2-1:2005

 

 

Specifications
Impulse Voltage 100V~5000V with a 10V resolution
Accuracy:±2%
Inductance Range ≥10uH
Impulse Energy Max.:0.25 Joule
Measuring Speed 6 meas/sec
Pulses Applied Max. 99
Input Impedance 5MΩ
Display 800x600 dots,65k color TFT, Waveform Display Dots: 600x256
Waveform Acquisition 8 Sampling Rates: Max. 200Msps, adjustable
Resolution: 8 Bits
Memory Depth: 6k Bytes
Average: 1 to 32
Comparison Methods Comparison with Standard Waveform:
 1.Area Size Comparison
 2.Differential Area Comparison
 3.Corona Discharge Comparison
4.Differential Phase Comparison
Waveform Measurement Voltage/Frequency/Time
Trigger Mode Manual/External/Bus
Detection Output OK/NG display/LED indicators/Sound Alarm
Measurement Statistics Statistics for measurement results
Memory 20 standard waveforms can be stored in internal non-volatile memory.
USB flash memory can be used as external memory.
Interface Handler,RS232C,USB Device, USB Host,Lan
Power
Power Supply 110V/220V±10%  50Hz/60Hz±5%
Power Consumption ≤200VA
General Specifications
Working environment Temperature 0°C - 40°C
Humidity ≤75% R.H.
Weight 15Kg
Dimensions (H x W x D) 132mmx400mmx390mm
Safety and EMC IEC61010-1:2001,IEC61326-2-1:2005

 

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

粤公网安备 44030402001445号